Enfosi Bamella Guide: Clone Threats, Stats and Counters

Learn how Enfosi Bamella summons its Shadow clone, uses heavy staff strikes, and threatens the statue. Use clear target priorities to survive Wave 6 together.

A single Enfosi Bamella can turn a manageable Wave 6 defense into a scramble, especially when its fast-moving Shadow clone reaches the statue. This Enfosi Bamella guide explains the enemy’s available stats, attack sequence, clone danger, and the safest response priorities based on published community information.

What Makes Enfosi Bamella So Dangerous?

Bamella is a modifier-exclusive enemy associated with Wave 6. According to the community-maintained Enfosi Wiki, it appears alongside Gleebers only when the Bamella modifier is enabled. It may initially look like another enemy moving toward the statue, but revealing or provoking it starts a much more dangerous combat pattern.

The core threat is not only Bamella’s staff. Its summoned Shadow can move extremely quickly, repeatedly slash a nearby target, and create chaos while the original enemy remains active. Players must watch both enemies at once instead of treating Bamella as a simple single-target threat.

Community reports describe Bamella as taller than many other Glaggles, with long limbs, khaki-colored skin, a head ribbon, spiked shoulder armor, and a staff. These visual details may help players identify an Enfosi Bamella before it gets close enough to pressure the statue.

Stat or trait	Bamella	Summoned Shadow
Health	400 normally; 600 when revealed	200
Health in Maniac mode	Not specified in the reference	300
Movement speed	Slightly slow	Extremely fast
Main damage	150 staff hit	30 per slash
Attack interval	2 seconds	0.25 seconds
Attack range	10.5	3
Damage resistance	None listed	None listed

These numbers explain the encounter’s unusual difficulty. Bamella itself is not especially fast, but the clone attacks four times per second according to the listed 0.25-second attack speed. If a Shadow remains in range, its repeated damage can become the immediate problem.

Enfosi Bamella Attack Pattern Explained

Understanding the timing order matters more than trying to out-damage everything at once. Published community information says Bamella begins by summoning its Shadow after it has been revealed for roughly three seconds. The summoning ability then repeats on an approximately 10-second cycle.

Importantly, the staff attack is unavailable until Bamella has used Summon. That gives players a brief opportunity to prepare for the clone before they also need to respect the original enemy’s powerful melee lunge.

Attack	What happens	Reported damage	Practical concern
Summon	Bamella raises its staff and creates a Shadow	No direct damage listed	Adds a fast secondary threat
Staff lunge	Bamella spins its staff and thrusts at a target	150	Heavy hit with long reach
Shadow Slash	Shadow repeatedly claws its target	30 per hit	Very rapid statue or player damage
Shadow Lunge	An enraged Shadow closes distance	Not listed	Makes escape and kiting harder

The summon comes first

After a Bamella is revealed, expect its first Shadow quickly rather than assuming it will immediately use the staff. The clone is described as a black, clawed version of Bamella and is associated with a visible explosive effect when it appears.

Only one clone can be active for each Bamella at a time. Community documentation says an existing clone disappears shortly before another is summoned, and a clone that dies is not immediately replaced. This creates a valuable window: eliminating the Shadow can leave the team free to focus on Bamella until its next summon interval.

The staff lunge is the burst-damage threat

Once Summon has occurred, Bamella can use its staff at close range. The listed 150 damage makes this attack particularly dangerous for players who stand too close or try to body-block without a defensive plan.

The staff’s 10.5 range is substantially greater than the Shadow’s listed range of 3. That means avoiding the clone does not automatically mean a player is safe from Bamella itself. Keep enough spacing to react to the staff lunge while maintaining awareness of where the Shadow is moving.

Maniac mode changes clone behavior

The available reference says the Maniac-mode Shadow does not immediately rush players in the usual way. Instead, it slowly follows the nearest target until Bamella is defeated.

That behavior sounds less aggressive at first, but it can be deceptive. A slowly following Shadow may still force a player away from a preferred defense position, separate teammates, or drift toward the statue if target priorities change. Treat its movement as a positioning problem, not a reason to ignore it.

How to Counter Bamella and Its Shadow

The safest approach to Enfosi Bamella is simple: identify the clone quickly, keep it away from the statue, and remove it before its rapid attacks accumulate. The source material specifically emphasizes that ordinary weapons can generally kill the clone very quickly, so a fast response is more important than panic.

Do not let the team split its attention randomly. One player should call out the clone, while nearby players either eliminate it or draw it away from the statue and vulnerable teammates.

Situation	Best immediate response	Why it works
Bamella has just been revealed	Prepare for the first summon	The Shadow arrives after about three seconds
Shadow spawns near the statue	Focus the clone first	Rapid attacks can damage the objective quickly
Bamella is in staff range	Create distance and avoid crowding	The staff lunge deals 150 damage
Clone targets a teammate	Kite it away from allies and the statue	Limits sudden target-switch damage
Multiple Bamellas are active	Assign targets and clear nearby Shadows	Several clones can overwhelm the defense

1. Prioritize the Shadow when it threatens the objective

A Shadow’s individual 30-damage slash may look smaller than Bamella’s 150-damage staff hit. However, the clone’s 0.25-second attack rate makes it the more urgent threat once it reaches a target.

At the listed speed, the clone can land multiple attacks during the time Bamella prepares a slower staff strike. Therefore, an Enfosi Bamella should usually be treated as a two-part encounter: control the clone first when it is near the statue, then return to damaging the original.

2. Kite with a purpose

Kiting means drawing an enemy away while staying alive. Against Bamella’s clone, the goal is not simply to run in any direction. Lead it away from the statue, keep it clear of teammates, and avoid routes where it could abruptly switch targets into the group.

Community strategy notes warn that clones can rapidly harm teammates or the statue when their target priority changes. If you are distracting one, give the rest of the team room to finish it safely.

3. Do not become careless after killing a clone

The clone may die quickly, but Bamella remains capable of another summon on its interval. Players who immediately collapse onto Bamella without checking the timing can be caught by the next Shadow spawn.

A good team rhythm is:

Call out the revealed Bamella.
Expect the first Shadow after roughly three seconds.
Kill or pull away the clone.
Respect the staff lunge while attacking Bamella.
Watch for the next summon at about 10 seconds.
Repeat until the original enemy is gone.

4. Use parries carefully, not casually

Community reports mention a risky Gembo technique: timing a parry as Bamella creates its clone may eliminate both at once. This can be efficient, but it is not a low-risk default strategy.

The timing must be accurate, and failure can leave the player exposed to both the clone and the staff user. Use the tactic only if you already understand Gembo’s parry timing and the team is not relying on one missed defensive play to save the statue.

Important Uncertainties in Community Information

The available information for Bamella is community-maintained rather than an official developer combat guide. It is useful for learning the encounter, but players should be aware of a notable inconsistency in the descriptions of what happens after Bamella dies.

One section states that the clone despawns when its Bamella is defeated. Another says the Shadow becomes enraged after its summoner dies, gaining increased movement speed, 45-damage slashes, and access to a lunge if it is too far from its target.

Because those descriptions conflict, do not rely on a clone disappearing immediately after killing Bamella. The safer practical assumption is that a Shadow may remain dangerous long enough to require attention. Community reports also state that the clone’s stomping audio is loud, which may help players locate it during hectic fights.

Reported post-defeat behavior	What the source says	Safe player response
Clone despawns	One behavior description says it vanishes with Bamella	Confirm visually before changing targets
Clone enrages	Attack notes say it gains speed, 45-damage slashes, and Lunge	Be ready to finish or kite it
Maniac clone behavior	It slowly follows the nearest target until Bamella falls	Keep it away from the statue

For general account, platform, and safety resources, players can also visit the official Roblox Support Center. It does not document Bamella’s mechanics, but it is the appropriate official resource for Roblox platform assistance.

Wave 6 Team Plan for Bamella Modifier Runs

Teams do not need a complicated strategy to handle Bamella, but they do need roles. The largest failures happen when everyone attacks the original enemy while the clone reaches the statue unnoticed.

A practical defense plan divides attention between target calling, clone removal, and safe positioning.

Team role	Main responsibility	Priority call
Spotter	Identify revealed Bamellas and Shadow spawns	“Clone up”
Clone responder	Remove or kite the Shadow	“Shadow off statue”
Main damage	Attack Bamella when clone pressure is controlled	“Back on Bamella”
Defensive player	Use parries or protection only when confident	“Hold safe spacing”

If the group has only a few players, simplify the plan: the nearest player handles the Shadow, while everyone else maintains distance from the staff lunge. The statue is the priority; chasing Bamella across the map while leaving its clone beside the objective is rarely worthwhile.

Remember that Bamella has no listed damage resistance. That does not mean it is harmless. It means efficient damage is possible once players control the encounter’s real complication: the Shadow’s speed and attack frequency.

FAQ

When does Enfosi Bamella appear?

Community documentation lists Bamella as a modifier-exclusive enemy that debuts in Wave 6 alongside Gleebers when the Bamella modifier is active.

How much damage does Enfosi Bamella deal?

Its staff lunge is listed at 150 damage. Its Shadow clone deals 30 damage per slash, while an enraged Shadow is reported to deal 45 damage per slash.

Should players kill Bamella or its clone first?

If the clone is near the statue, nearby teammates, or another critical target, deal with the clone first. Its extremely fast movement and 0.25-second attack rate make it the immediate danger. Return to Bamella once the Shadow is controlled.

Can Bamella summon more than one clone?

No. Community information says each Bamella can have only one active clone at a time. A previous clone disappears shortly before a new one is created, and a clone killed early is not immediately resummoned.